Detailed Product Description

1. Model M1350 Cylindrical Grinder is designed for grinding cylindrical or taper surface of rotational Parts. It is highly adaptable for single and small batch production.
2. Model M1450 Cylindrical Grinder is designed for grinding cylindrical or inner hole surface of rotational Parts or conical surfaces of rotational Parts.It is highly adaptable for single and small batch production.
3. The table traverse is actuated by hydraulic means at infinitely variable speed or operated by hand.The up table may twist to a certainty angle,It is suitable for the cone workpiece by centor to center.
4. Auto intermittent infeed and rapid approach and withdrawal of the wheelhead can be effected hydraulically,while rough-fine realized by handwheel.
5. The worktable and wheelhead slide a slideivags are covered by the plastic and hydrostatically,so it can gain the stable slow speed running and high immunity to vibration.
6. High rotating accuracy,excellent rigidity are available since the new type sleeve dynamic bearings with large taper are adopted on wheel spindle.

MODEL:M1450x2000 /M1450x2500 /M1450x3000 /M1350x2000 /M1350x2500 /M1350x3000
Center height:270
Max.length of workpi ece between centers:2000/2500/3000/2000/2500/3000mm
Max.workpiece diameter for external:500mm
Max.grinding length:2000/2500/3000/2000/2500/3000mm
External grinding range :30~500 mm
Internal grinding range:50~250 /50~250 /50~250 /--/--/--
Max.weight of grindi ng workpi ece cent ers: 1000kg
Grinding wheel
Dimensions(mm ):750x75x305mm
Max.linear velocity:35 m/sec
Swivelling angle of table
Clockwise:2
Counter-clockwise:4
Taper hole of spindle(Morse)
Workhead:6#
Tailstocd:6#
Total power:19.48/19.48/19.48/17.28/17.28/17.28kw
Net weight: 10570/12700/13570/10570/12700/13570kg
Overall dimensions:600x220x200 /670x220x200 /770x220x200 /600x220x200/670x220x200 /770x220x200cm